Miniature End Mills - Ball - Stub & Standard

Miniature End Mills - Ball Miniature End Mills - Ball

Carbide Miniature End Mills - Ball - Stub & Standard

  • Cutter diameter down to .002"
  • Center cutting
  • Solid carbide
  • CNC ground in the USA  
Jump to Product Reviews

Below are downloadable Simulation Files in DXF format (half-round line drawings) to accompany Harvey Tool products. Each file is specifically scaled to the geometry of the tool to help simulate running parameters and create tool paths. Like our speeds & feeds charts, these files will be continuously updated with the introduction of new products and new catalogs to assist operating the majority of our tools. Simulation files can also be accessed by searching for a specific tool number on the left-hand side of the website and then clicking on the Simulation table in the product table.
Please don’t hesitate to contact our tech team with any questions at 800-645-5609 or tech@harveytool.com.

To navigate between folders or download a file, DOUBLE CLICK on the folder or file.

  • AlTiN Coated
  • Amorphous Diamond
  • Uncoated
CUTTER DIA. LOC SHANK DIA. OAL UNCOATED AlTiN COATED AMORPHOUS DIAMOND
D1 +.0005"/-.0005" L2 +.010"/-.000" D2 L1 2 FL 4 FL PRICE 2 FL 4 FL PRICE 2 FL 4 FL PRICE
.002 .003 (1.5x) 1/8 1-1/2 24502 52.70
.002 .006 (3x) 1/8 1-1/2 74002 52.70
.003 .004 (1.5x) 1/8 1-1/2 24503 46.70
.003 .009 (3x) 1/8 1-1/2 74003 46.70
.004 (.1 mm) .006 (1.5x) 1/8 1-1/2 24504 41.90
.004 (.1 mm) .012 (3x) 1/8 1-1/2 74004 41.90
.005 .007 (1.5x) 1/8 1-1/2 24505 37.90
.005 .015 (3x) 1/8 1-1/2 74005 37.90
.006 .009 (1.5x) 1/8 1-1/2 24506 38.70
.006 .018 (3x) 1/8 1-1/2 74006 38.70
.007 .010 (1.5x) 1/8 1-1/2 24507 38.70
.007 .021 (3x) 1/8 1-1/2 74007 38.70
.008 (.2 mm) .012 (1.5x) 1/8 1-1/2 24508 38.70
.008 (.2 mm) .024 (3x) 1/8 1-1/2 74008 38.70
.009 .013 (1.5x) 1/8 1-1/2 24509 38.70
.009 .027 (3x) 1/8 1-1/2 74009 38.70
.010 .015 (1.5x) 1/8 1-1/2 24510 24610 31.10 24510-C3 24610-C3 35.10 24610-C4 41.60
.010 .030 (3x) 1/8 1-1/2 74010 74310 31.10 74010-C3 74310-C3 35.10 74010-C4 74310-C4 41.60
.011 .016 (1.5x) 1/8 1-1/2 24511 24611 31.70 24611-C3 35.70
.011 .033 (3x) 1/8 1-1/2 74011 74311 31.70 74311-C3 35.70
.012 (.3 mm) .018 (1.5x) 1/8 1-1/2 24512 24612 31.70 24612-C3 35.70
.012 (.3 mm) .036 (3x) 1/8 1-1/2 74012 74312 31.70 74312-C3 35.70
.013 .019 (1.5x) 1/8 1-1/2 24513 24613 31.70 24613-C3 35.70
.013 .039 (3x) 1/8 1-1/2 74013 74313 31.70 74313-C3 35.70
.014 .021 (1.5x) 1/8 1-1/2 24514 24614 31.70 24614-C3 35.70
.014 .042 (3x) 1/8 1-1/2 74014 74314 31.70 74314-C3 35.70
.015 (1/64) .022 (1.5x) 1/8 1-1/2 24515 24615 24.30 24515-C3 24615-C3 28.30 24615-C4 34.80
.015 (1/64) .045 (3x) 1/8 1-1/2 74015 74315 24.30 74015-C3 74315-C3 28.30 74015-C4 74315-C4 34.80
.016 (.4 mm) .024 (1.5x) 1/8 1-1/2 24516 24616 25.40 24616-C3 29.40
.016 (.4 mm) .048 (3x) 1/8 1-1/2 74016 74316 25.40 74316-C3 29.40
.017 .026 (1.5x) 1/8 1-1/2 24517 24617 25.40 24617-C3 29.40
.017 .051 (3x) 1/8 1-1/2 74017 74317 25.40 74317-C3 29.40
.018 .027 (1.5x) 1/8 1-1/2 24518 24618 25.40 24618-C3 29.40
.018 .054 (3x) 1/8 1-1/2 74018 74318 25.40 74318-C3 29.40
.019 .029 (1.5x) 1/8 1-1/2 24519 24619 25.40 24619-C3 29.40
.019 .057 (3x) 1/8 1-1/2 74019 74319 25.40 74319-C3 29.40
.020 (.5 mm) .030 (1.5x) 1/8 1-1/2 24520 24620 23.40 24520-C3 24620-C3 27.40 24620-C4 33.90
.020 (.5 mm) .060 (3x) 1/8 1-1/2 74020 74320 23.40 74020-C3 74320-C3 27.40 74020-C4 74320-C4 33.90
.021 .031 (1.5x) 1/8 1-1/2 24521 24621 24.40 24621-C3 28.40
.021 .063 (3x) 1/8 1-1/2 74021 74321 24.40 74321-C3 28.40
.022 .033 (1.5x) 1/8 1-1/2 24522 24622 24.40 24622-C3 28.40
.022 .066 (3x) 1/8 1-1/2 74022 74322 24.40 74322-C3 28.40
.023 .035 (1.5x) 1/8 1-1/2 24523 24623 24.40 24623-C3 28.40
.023 .069 (3x) 1/8 1-1/2 74023 74323 24.40 74323-C3 28.40
.024 (.6 mm) .036 (1.5x) 1/8 1-1/2 24524 24624 24.40 24624-C3 28.40
.024 (.6 mm) .072 (3x) 1/8 1-1/2 74024 74324 24.40 74324-C3 28.40
.025 .037 (1.5x) 1/8 1-1/2 24525 24625 21.20 24525-C3 24625-C3 25.20 24625-C4 31.70
.025 .075 (3x) 1/8 1-1/2 74025 74325 21.20 74025-C3 74325-C3 25.20 74025-C4 74325-C4 31.70
.026 .039 (1.5x) 1/8 1-1/2 24526 24626 22.10 24626-C3 26.10
.026 .078 (3x) 1/8 1-1/2 74026 74326 22.10 74326-C3 26.10
.027 .041 (1.5x) 1/8 1-1/2 24527 24627 22.10 24627-C3 26.10
.027 .081 (3x) 1/8 1-1/2 74027 74327 22.10 74327-C3 26.10
.028 (.7 mm) .042 (1.5x) 1/8 1-1/2 24528 24628 22.10 24628-C3 26.10
.028 (.7 mm) .084 (3x) 1/8 1-1/2 74028 74328 22.10 74328-C3 26.10
.029 .043 (1.5x) 1/8 1-1/2 24529 24629 22.10 24629-C3 26.10
.029 .087 (3x) 1/8 1-1/2 74029 74329 22.10 74329-C3 26.10
.030 .045 (1.5x) 1/8 1-1/2 24530 24630 19.20 24530-C3 24630-C3 23.20 24630-C4 29.70
.030 .090 (3x) 1/8 1-1/2 74030 74330 19.20 74030-C3 74330-C3 23.20 74030-C4 74330-C4 29.70
.031 (1/32) .046 (1.5x) 1/8 1-1/2 24531 24631 19.20 24531-C3 24631-C3 23.20 24631-C4 29.70
.031 (1/32) .093 (3x) 1/8 1-1/2 74031 74331 19.20 74031-C3 74331-C3 23.20 74031-C4 74331-C4 29.70
.032 .048 (1.5x) 1/8 1-1/2 24532 24632 20.10 24632-C3 24.10
.032 .096 (3x) 1/8 1-1/2 74032 74332 20.10 74332-C3 24.10
.033 .049 (1.5x) 1/8 1-1/2 24533 24633 20.10 24633-C3 24.10
.033 .099 (3x) 1/8 1-1/2 74033 74333 20.10 74333-C3 24.10
.034 .051 (1.5x) 1/8 1-1/2 24534 24634 20.10 24634-C3 24.10
.034 .102 (3x) 1/8 1-1/2 74034 74334 20.10 74334-C3 24.10
.035 (.9 mm) .052 (1.5x) 1/8 1-1/2 24535 24635 18.10 24535-C3 24635-C3 22.10 24635-C4 28.60
.035 (.9 mm) .105 (3x) 1/8 1-1/2 74035 74335 18.10 74035-C3 74335-C3 22.10 74035-C4 74335-C4 28.60
.036 .054 (1.5x) 1/8 1-1/2 24536 24636 18.90 24636-C3 22.90
.036 .108 (3x) 1/8 1-1/2 74036 74336 18.90 74336-C3 22.90
.037 .055 (1.5x) 1/8 1-1/2 24537 24637 18.90 24637-C3 22.90
.037 .111 (3x) 1/8 1-1/2 74037 74337 18.90 74337-C3 22.90
.038 .057 (1.5x) 1/8 1-1/2 24538 24638 18.90 24638-C3 22.90
.038 .114 (3x) 1/8 1-1/2 74038 74338 18.90 74338-C3 22.90
.039 (1 mm) .058 (1.5x) 1/8 1-1/2 24539 24639 18.50 24639-C3 22.50
.039 (1 mm) .117 (3x) 1/8 1-1/2 74039 74339 18.50 74039-C3 74339-C3 22.50
.040 .060 (1.5x) 1/8 1-1/2 24540 24640 18.10 24540-C3 24640-C3 22.10 24640-C4 28.60
.040 .120 (3x) 1/8 1-1/2 74040 74340 18.10 74040-C3 74340-C3 22.10 74040-C4 74340-C4 28.60
.041 .123 (3x) 1/8 1-1/2 74041 74341 18.90 74341-C3 22.90
.042 .126 (3x) 1/8 1-1/2 74042 74342 18.90 74342-C3 22.90
.043 (1.1 mm) .129 (3x) 1/8 1-1/2 74043 74343 18.90 74343-C3 22.90
.044 .132 (3x) 1/8 1-1/2 74044 74344 18.90 74344-C3 22.90
.045 .067 (1.5x) 1/8 1-1/2 24545 24645 18.10 24645-C3 22.10 24645-C4 28.60
.045 .135 (3x) 1/8 1-1/2 74045 74345 18.10 74045-C3 74345-C3 22.10 74045-C4 74345-C4 28.60
.046 .138 (3x) 1/8 1-1/2 74046 74346 18.90 74346-C3 22.90
.047 (3/64) .070 (1.5x) 1/8 1-1/2 24547 24647 18.10 24547-C3 24647-C3 22.10 24647-C4 28.60
.047 (3/64) .141 (3x) 1/8 1-1/2 74047 74347 18.10 74047-C3 74347-C3 22.10 74047-C4 74347-C4 28.60
.048 .144 (3x) 1/8 1-1/2 74048 74348 18.90 74348-C3 22.90
.049 .147 (3x) 1/8 1-1/2 74049 74349 18.90 74349-C3 22.90
.050 .075 (1.5x) 1/8 1-1/2 24550 24650 18.10 24650-C3 22.10 24650-C4 28.60
.050 .150 (3x) 1/8 1-1/2 74050 74350 18.10 74050-C3 74350-C3 22.10 74050-C4 74350-C4 28.60
.051 (1.3 mm) .153 (3x) 1/8 1-1/2 74051 74351 18.90 74351-C3 22.90
.052 .156 (3x) 1/8 1-1/2 74052 74352 18.90 74352-C3 22.90
.053 .159 (3x) 1/8 1-1/2 74053 74353 18.90 74353-C3 22.90
.054 .162 (3x) 1/8 1-1/2 74054 74354 18.90 74354-C3 22.90
.055 (1.4 mm) .082 (1.5x) 1/8 1-1/2 24555 24655 18.10 24655-C3 22.10 24655-C4 28.60
.055 (1.4 mm) .165 (3x) 1/8 1-1/2 74055 74355 18.10 74055-C3 74355-C3 22.10 74055-C4 74355-C4 28.60
.056 .168 (3x) 1/8 1-1/2 74056 74356 18.90 74356-C3 22.90
.057 .171 (3x) 1/8 1-1/2 74057 74357 18.90 74357-C3 22.90
.058 .174 (3x) 1/8 1-1/2 74058 74358 18.90 74358-C3 22.90
.059 (1.5 mm) .177 (3x) 1/8 1-1/2 74059 74359 18.90 74359-C3 22.90
.060 .090 (1.5x) 1/8 1-1/2 24560 24660 18.10 24660-C3 22.10 24660-C4 28.60
.060 .180 (3x) 1/8 1-1/2 74060 74360 18.10 74060-C3 74360-C3 22.10 74060-C4 74360-C4 28.60
.062 (1/16) .093 (1.5x) 1/8 1-1/2 24562 24662 17.60 24562-C3 24662-C3 21.60 24662-C4 28.10
.062 (1/16) .186 (3x) 1/8 1-1/2 74062 74362 17.60 74062-C3 74362-C3 21.60 74062-C4 74362-C4 28.10
.065 .097 (1.5x) 1/8 1-1/2 24565 24665 17.60 24665-C3 21.60
.065 .195 (3x) 1/8 1-1/2 74065 74365 17.60 74365-C3 21.60 74065-C4 74365-C4 28.10
.070 .105 (1.5x) 1/8 1-1/2 24570 24670 17.60 24670-C3 21.60
.070 .210 (3x) 1/8 1-1/2 74070 74370 17.60 74370-C3 21.60 74070-C4 74370-C4 28.10
.075 .112 (1.5x) 1/8 1-1/2 24575 24675 17.60 24675-C3 21.60
.075 .225 (3x) 1/8 1-1/2 74075 74375 17.60 74375-C3 21.60
.078 (5/64) .117 (1.5x) 1/8 1-1/2 24578 24678 17.60 24578-C3 24678-C3 21.60 24678-C4 28.10
.078 (5/64) .234 (3x) 1/8 1-1/2 74078 74378 17.60 74078-C3 74378-C3 21.60 74078-C4 74378-C4 28.10
.080 .120 (1.5x) 1/8 1-1/2 24580 24680 17.60 24680-C3 21.60
.080 .240 (3x) 1/8 1-1/2 74080 74380 17.60 74380-C3 21.60 74080-C4 74380-C4 28.10
.085 .127 (1.5x) 1/8 1-1/2 24585 24685 17.60 24685-C3 21.60
.085 .255 (3x) 1/8 1-1/2 74085 74385 17.60 74385-C3 21.60
.090 .135 (1.5x) 1/8 1-1/2 24590 24690 17.60 24690-C3 21.60
.090 .270 (3x) 1/8 1-1/2 74090 74390 17.60 74390-C3 21.60 74090-C4 74390-C4 28.10
.093 (3/32) .139 (1.5x) 1/8 1-1/2 24593 24693 17.60 24593-C3 24693-C3 21.60 24693-C4 28.10
.093 (3/32) .279 (3x) 1/8 1-1/2 74093 74393 17.60 74093-C3 74393-C3 21.60 74093-C4 74393-C4 28.10
.095 .142 (1.5x) 1/8 1-1/2 24595 24695 17.60 24695-C3 21.60
.095 .285 (3x) 1/8 1-1/2 74095 74395 17.60 74395-C3 21.60
.100 .150 (1.5x) 1/8 1-1/2 24599 24699 17.60 24699-C3 21.60
.100 .300 (3x) 1/8 1-1/2 74100 74400 17.60 74400-C3 21.60 74100-C4 74400-C4 28.10
.105 .158 (1.5x) 1/8 1-1/2 50900 51000 17.60 51000-C3 21.60
.105 .315 (3x) 1/8 1-1/2 74105 74405 17.60 74405-C3 21.60
.109 (7/64) .375 (3x) 1/8 1-1/2 74109 74409 17.60 74109-C3 74409-C3 21.60
.110 .165 (1.5x) 1/8 1-1/2 50902 51002 17.60 51002-C3 21.60
.110 .330 (3x) 1/8 1-1/2 74110 74410 17.60 74410-C3 21.60
.115 .173 (1.5x) 1/8 1-1/2 50903 51003 17.60 51003-C3 21.60
.115 .345 (3x) 1/8 1-1/2 74115 74415 17.60 74415-C3 21.60
.118 (3 mm) .177 (1.5x) 1/8 1-1/2 50904 51004 18.10 51004-C3 22.10
.118 (3 mm) .354 (3x) 1/8 1-1/2 74118 74418 18.10 74118-C3 74418-C3 22.10
.120 .180 (1.5x) 1/8 1-1/2 50905 51005 17.60 51005-C3 21.60
.120 .360 (3x) 1/8 1-1/2 74120 74420 17.60 74420-C3 21.60
D1 +.000"/-.002" L2 +.030"/-.000" D2 L1 2FL 4FL PRICE 2FL 4FL PRICE 2FL 4FL PRICE
.125 (1/8) .187 (1.5x) 1/8 1-1/2 50908 51008 17.60 51008-C3 21.60 51008-C4 28.10
.125 (1/8) .375 (3x) 1/8 1-1/2 74125 74425 17.60 74125-C3 74425-C3 21.60 74125-C4 74425-C4 28.10
.140 (9/64) .220 (1.5x) 3/16 2 50909 51009 18.10 51009-C3 22.40
.140 (9/64) .562 (3x) 3/16 2 74140 74440 18.10 74140-C3 74440-C3 22.40
.156 (5/32) .281 (1.5x) 3/16 2 50910 51010 18.10 51010-C3 22.40
.156 (5/32) .562 (3x) 3/16 2 74156 74456 18.80 74456-C3 23.10
.187 (3/16) .312 (1.5x) 3/16 2 50912 51012 18.80 51012-C3 23.10 51012-C4 33.30
.187 (3/16) .625 (3x) 3/16 2 74187 74487 18.80 74487-C3 23.10 74187-C4 74487-C4 33.30
.218 (7/32) .625 (3x) 1/4 2-1/2 74193 74493 21.10 74193-C3 74493-C3 27.10
.250 (1/4) .375 (1.5x) 1/4 2-1/2 50916 51016 21.10 51016-C3 27.10 51016-C4 37.60
.250 (1/4) .750 (3x) 1/4 2-1/2 74199 74499 21.10 74499-C3 27.10 74199-C4 74499-C4 37.60

Speeds & Feeds

Below you will find downloadable and printer-friendly Speeds & Feeds for this product line. All posted Speed & Feed parameters are suggested starting values that may be increased given optimal setup conditions. If you can't find the information you're looking for, Harvey Tool has a team of technical experts available to assist you. Please contact us at 800-645-5609 or tech@harveytool.com.

 

Ball Stub & Standard - 1.5x LOC, 2 Flute

Ball Stub & Standard - 1.5x LOC, 4 Flute

Ball Stub & Standard - 3x LOC, 2 Flute

Ball Stub & Standard - 3x LOC, 4 Flute

Harvey Tool offers a wide assortment of specialty Miniature Ball End Mills in a variety of sizes and lengths of cut. You may find our Advanced Search feature helpful to locate the best stock tool for your application. The Advanced Search allows you to select your critical dimensions to narrow your search. However, if you are looking for a tool that we don’t offer as a standard, we can provide you with a special custom tool. Simply fill out the Request for Quote (RFQ) Template that best represents the tool you need, and submit via email or fax. One of our technical experts will get back to you. If you need help designing your special tool, you can contact our Quotations Department.

Phone - 978-948-8555 ext. 6004 - Ask for our Quotations Department.
RFQ Fax - 978-948-8560
Email - 
tech@harveytool.com.


BALL PROFILE:

Special RFQ - Ball End Mills (Miniature)

Special RFQ - Ball End Mills

Special RFQ - Ball End Mills (Miniature, Long Reach)

Special RFQ - Ball End Mills (Long Reach)


Need To Place An Order? Find A Local Distributor

Machinists' Feedback

2 reviews for this product. Average rating: Rating StarRating StarRating StarRating StarRating Star

Create your own review

Rating StarRating StarRating StarRating StarRating Star   Miniature endmills

By Sean D. Spokane Valley, WA, United States, December 02, 2013

I use Harvey Tool CVD coated almost exclusively. I machine graphite for intricate EDM work. Harvey makes my life easy. Every time I load a new endmill, I get the same diameter within a few tenths. They also have very low runout. I even get alot of linear feet out of the CVD coated 4fl .010 BEM. I use .010, .015, .020, .030, .062, .125 in SEM and BEM and a few in BULL.

4 of 4 people found the following review helpful:
Was this review helpful to you?  Yes | No

Rating StarRating StarRating StarRating StarRating Star   Miniature Ball Mills for burr-free cross-hole drilling!

By Judson W. Franklin Park, IL, United States, September 05, 2013

We've found that Harvey's 24500 & 74000 series 2-flute Miniature Ball End Mills are ideal for drilling cross-holes and weep-holes - even without centering - through thin-wall surfaces without leaving burrs either entering or on the break-out side.

3 of 4 people found the following review helpful:
Was this review helpful to you?  Yes | No

E-mail A Friend

Privacy Policy. All rights reserved. All Content Herein © 2017 Harvey Tool