Variable Helix End Mills - Ball - For Free Machining Steels

Carbide Variable Helix End Mills - Ball - For Free Machining Steels

 Optimized for free machining varieties of carbon steels and stainless steels.

  • Variable helix design reduces chatter and harmonics and increases material removal rates
  • AlTiN coated for improved lubricity and heat resistance
  • h6 shank tolerance for shrink fit holders
  • Center cutting
  • Solid carbide
  • CNC ground in the USA  
Jump to Product Reviews

Below are downloadable Simulation Files in DXF format (half-round line drawings) to accompany Harvey Tool products. Each file is specifically scaled to the geometry of the tool to help simulate running parameters and create tool paths. Like our speeds & feeds charts, these files will be continuously updated with the introduction of new products and new catalogs to assist operating the majority of our tools. Simulation files can also be accessed by searching for a specific tool number on the left-hand side of the website and then clicking on the Simulation table in the product table.
Please don’t hesitate to contact our tech team with any questions at 800-645-5609 or tech@harveytool.com.

To navigate between folders or download a file, DOUBLE CLICK on the folder or file.

  • AlTiN
CUTTER DIAMETER LENGTH
OF CUT
  FLUTES SHANK DIAMETER OVERALL LENGTH AlTiN COATED
D1 +.0005"/-.0005" L2 +.010"/-.000"     D2 (h6) L1 TOOL #  PRICE
.015 (1/64) .045 (3x) 3 1/8 1-1/2 950015-C3 40.30
.031 (1/32) .093 (3x) 3 1/8 1-1/2 950031-C3 30.80
.047 (3/64) .141 (3x) 3 1/8 1-1/2 950047-C3 30.80
.062 (1/16) .186 (3x) 3 1/8 1-1/2 950062-C3 29.10
.078 (5/64) .234 (3x) 3 1/8 1-1/2 950078-C3 29.10
.093 (3/32) .279 (3x) 3 1/8 1-1/2 950093-C3 29.10
               
D1 +.000"/-.002" L2 +.030"/-.000"     D2 (h6) L1 TOOL #  PRICE
.125 (1/8) .375 (3x) 4 1/8 1-1/2 950108-C3 29.10
.156 (5/32) .470  (3x) 4 3/16 2 950110-C3 31.10
.187 (3/16) .562 (3x) 4 3/16 2 950112-C3 31.10
.250 (1/4) .750 (3x) 4 1/4 2-1/2 950116-C3 37.80

Speeds & Feeds

Below you will find downloadable and printer-friendly Speeds & Feeds for this product line. All posted Speed & Feed parameters are suggested starting values that may be increased given optimal setup conditions. If you can't find the information you're looking for, Harvey Tool has a team of technical experts available to assist you. Please contact us at 800-645-5609 or tech@harveytool.com.

Variable Helix End Mills

Variable Helix for Free Machining Steels - Ball - 3x LOC



Need To Place An Order? Find A Local Distributor

Machinists' Feedback

Used this tool? Share your experiences.

Create your own review

E-mail A Friend

Privacy Policy. All rights reserved. All Content Herein © 2015 Harvey Tool