Keyseat Cutters - Full Radius Large Diameter

Keyseat Cutters - Full Radius Large Diameter Keyseat Cutters - Standard Slotting v. Deep Slotting
Carbide Keyseat Cutters - Full Radius Large Diameter

  • Ground form relieved: can be re-ground without losing radius
  • 6 flutes
  • Both sides of cutter are dished for clearance
  • Solid carbide head with steel shank
  • CNC ground in the USA  
Jump to Product Reviews

Below are downloadable Simulation Files in DXF format (half-round line drawings) to accompany Harvey Tool products. Each file is specifically scaled to the geometry of the tool to help simulate running parameters and create tool paths. Like our speeds & feeds charts, these files will be continuously updated with the introduction of new products and new catalogs to assist operating the majority of our tools. Simulation files can also be accessed by searching for a specific tool number on the left-hand side of the website and then clicking on the Simulation table in the product table.
Please don’t hesitate to contact our tech team with any questions at 800-645-5609 or tech@harveytool.com.

To navigate between folders or download a file, DOUBLE CLICK on the folder or file.

  • AlTiN
  • Uncoated
RADIUS CUTTER DIA. CUTTER WIDTH Radial DOC* TYPE SHANK DIA. OAL  UNCOATED  AlTiN COATED
R +.001"/
-.001"
D1 +.010"/
-.000"
L2   X D2 L1 6 FL PRICE 6 FL PRICE
1/64 3/4 1/32 .177 II 3/8 3-1/32 965415 120.50 965415-C3 133.50
1/64 3/4 1/32 .115 I 1/2 3-1/32 32901 111.70 32901-C3 124.70
.020 3/4 .040 .115 I 1/2 3.040 959720 111.70 959720-C3 124.70
1/32 3/4 1/16 .177 II 3/8 3-1/16 965431 120.50 965431-C3 133.50
1/32 3/4 1/16 .115 I 1/2 3-1/16 32902 111.70 32902-C3 124.70
1 mm 3/4 2 mm .115 I 1/2 3.078 3291M 111.70 3291M-C3 124.70
3/64 3/4 3/32 .115 I 1/2 3-3/32 32903 111.70 32903-C3 124.70
1/16 3/4 1/8 .177 II 3/8 3-1/8 965462 120.50 965462-C3 133.50
1/16 3/4 1/8 .115 I 1/2 3-1/8 32904 111.70 32904-C3 124.70
5/64 3/4 5/32 .115 I 1/2 3-5/32 959778 111.70 959778-C3 124.70
5/64 1 5/32 .240 I 1/2 3-5/32 32905 131.10 32905-C3 151.10
2 mm 1 4 mm .240 I 1/2 3.157 3292M 131.10 3292M-C3 151.10
3/32 3/4 3/16 .115 I 1/2 3-3/16 959793 111.70 959793-C3 124.70
3/32 1 3/16 .302 II 3/8 3-3/16 937393 120.50 937393-C3 133.50
3/32 1 3/16 .240 I 1/2 3-3/16 32906 131.10 32906-C3 151.10
3 mm 1 6 mm .240 I 1/2 3.236 942694 131.10 942694-C3 151.10
1/8 1 1/4 .240 I 1/2 3-1/4 942695 131.10 942695-C3 151.10
1/8 1-1/4 1/4 .240 I 3/4 3-1/2 32908 147.10 32908-C3 172.10
3/16 1-3/8 3/8 .302 I 3/4 3-5/8 32912 180.40 32912-C3 205.40
1/4 1-1/2 1/2 .365 I 3/4 4 32916 199.40 32916-C3 224.40

Speeds & Feeds

Below you will find downloadable and printer-friendly Speeds & Feeds for this product line. All posted Speed & Feed parameters are suggested starting values that may be increased given optimal setup conditions. If you can't find the information you're looking for, Harvey Tool has a team of technical experts available to assist you. Please contact us at 800-645-5609 or tech@harveytool.com.

Keyseat Cutters

Keyseat Cutters - Full Radius Large Diameter, 6 Flute

Keyseat Cutters - Full Radius Large Diameter Deep Slotting, 6 Flute

 

Need To Place An Order? Find A Local Distributor

Machinists' Feedback

One review for this product. Average rating: Rating StarRating StarRating StarRating StarRating Star

Create your own review

Rating StarRating StarRating StarRating StarRating Star   GREAT SUCCESS!

By David S. Norton, KS, United States, January 10, 2013

We had to go deep into a hole and cut a super tight tolerance annulus feature with a tight finish requirement. After little luck we purchased some special made .9mm convex Keyseat Cutters from Harvey Tool. Problem solved! This is our go-to distributor when it comes to difficult to machine features and requirements!

2 of 3 people found the following review helpful:
Was this review helpful to you?  Yes | No

E-mail A Friend

Privacy Policy. All rights reserved. All Content Herein © 2015 Harvey Tool
/* */