Chamfer Cutters - Deburring Chamfer Cutters

Chamfer Cutters - Deburring Chamfer Cutters Chamfer Cutters - Deburring Chamfer Cutters two angle per side diagram
Carbide Chamfer Cutters - Deburring Chamfer Cutters 

  • End mill tolerances with burr-style geometry
  • Deburr in your CNC machine with these high precision burs held to end mill tolerances
  • Stop scrapping expensive parts due to handheld operator errors
  • High number of flutes allows for faster speeds and feeds
  • Achieve better finish than with milling type cutters
  • Tight end mill tolerances allow use of standard programming and tool paths
  • Cone shaped burs are effective in removing burrs and/or adding a small controlled edge break with superior finish
  • Double cut style flute pattern
  • Solid carbide
  • CNC ground in the USA  
Jump to Product Reviews

Below are downloadable Simulation Files in DXF format (half-round line drawings) to accompany Harvey Tool products. Each file is specifically scaled to the geometry of the tool to help simulate running parameters and create tool paths. Like our speeds & feeds charts, these files will be continuously updated with the introduction of new products and new catalogs to assist operating the majority of our tools. Simulation files can also be accessed by searching for a specific tool number on the left-hand side of the website and then clicking on the Simulation table in the product table.
Please don’t hesitate to contact our tech team with any questions at 800-645-5609 or tech@harveytool.com.

To navigate between folders or download a file, DOUBLE CLICK on the folder or file.

  • AlTiN
  • Uncoated
ANGLE PER SIDE LOC RIGHT HAND TEETH LEFT HAND TEETH MINOR DIAMETER SHANK DIA. OAL UNCOATED  AlTiN COATED
A +0°30'/-0°30' L2        D2  L1  TOOL #  PRICE TOOL # PRICE
30° .099 12 6 .012 (Max.) 1/8 2-1/2 58130 21.40 58130-C3 25.60
45° .057 12 6 .012 (Max.) 1/8 2-1/2 58145 21.40 58145-C3 25.60
.120 12 6 .012 (Max.) 1/4 2-1/2 994045 30.30 994045-C3 36.50

Speeds & Feeds

Below you will find downloadable and printer-friendly Speeds & Feeds for this product line. All posted Speed & Feed parameters are suggested starting values that may be increased given optimal setup conditions. If you can't find the information you're looking for, Harvey Tool has a team of technical experts available to assist you. Please contact us at 800-645-5609 or tech@harveytool.com.

Chamfer Cutters - Deburring

Chamfer Cutters - Deburring Chamfer Cutters

Harvey Tool offers a wide assortment of specialty End Mills in a variety of sizes and lengths of cut. You may find our Advanced Search feature helpful to locate the best stock tool for your application. The Advanced Search allows you to select your critical dimensions to narrow your search. However, if you are looking for a tool that we don’t offer as a standard, we can provide you with a special custom tool. Simply fill out the Request for Quote (RFQ) Template that best represents the tool you need, and submit via email or fax. One of our technical experts will get back to you. If you need help designing your special tool, you can contact our Quotations Department.

Phone - 978-948-8555 ext. 6004 - Ask for our Quotations Department.
RFQ Fax - 978-948-8560
Email - tech@harveytool.com.


Special RFQ - Double Cut Chamfer Cutter
Below, please find additional technical resources related to this product line.


Angles Untangled
Includes angle conversion charts for all Chamfer Cutter angles.




If you require additional information, Harvey Tool has a team of technical experts available to assist you through even the most challenging applications. Please contact us at 800-645-5609 or 
tech@harveytool.com.

Need To Place An Order? Find A Local Distributor

Machinists' Feedback

Used this tool? Share your experiences.

Create your own review

E-mail A Friend

Privacy Policy. All rights reserved. All Content Herein © 2017 Harvey Tool