Diamond End Mills for Non-Ferrous Materials - CVD Diamond - Ball - Long Reach, Long Flute

Diamond End Mills for Non-Ferrous Materials - CVD Diamond - Ball - Long Reach, Long Flute

Outstanding in graphite!    

  • True crystalline CVD diamond on carbide substrate
  • Ideal for machining graphite and composites, green carbide and green ceramics
  • Maximum abrasion resistance increases tool life up to 50x
  • Reduced neck for clearance and maximum rigidity
  • 4 Flutes
  • h6 shank tolerance for high precision tool holders
  • Center Cutting
  • CNC ground in the USA
Jump to Product Reviews

Below are downloadable Simulation Files in DXF format (half-round line drawings) to accompany Harvey Tool products. Each file is specifically scaled to the geometry of the tool to help simulate running parameters and create tool paths. Like our speeds & feeds charts, these files will be continuously updated with the introduction of new products and new catalogs to assist operating the majority of our tools. Simulation files can also be accessed by searching for a specific tool number on the left-hand side of the website and then clicking on the Simulation table in the product table.
Please don’t hesitate to contact our tech team with any questions at 800-645-5609 or tech@harveytool.com.

To navigate between folders or download a file, DOUBLE CLICK on the folder or file.

CUTTER
DIAMETER
LENGTH
OF CUT
OVERALL
REACH
SHANK DIAMETER OVERALL LENGTH CVD DIAMOND
D1 +.000"/-.001" L2 +.010"/-.000" L3 +.010"/-.000" D2 L1 4 FL PRICE
.015 (1/64) .078 .156 (10x) 1/8 2-1/2 36515 120.10
.020 .100 .200 (10x) 1/8 2-1/2 36520 120.10
.025 .125 .250 (10x) 1/8 2-1/2 36525 120.10
.031 (1/32) .156 .312 (10x) 1/8 2-1/2 36531 120.10
.047 (3/64) .250 .480 (10x) 1/8 2-1/2 36547 120.10
.062 (1/16) .312 .625 (10x) 1/8 2-1/2 36562 107.90
.078 (5/64) .406 .800 (10x) 1/8 2-1/2 36578 107.90
.093 (3/32) .500 .950 (10x) 1/8 2-1/2 36593 107.90
D1 +.000"/-.002" L2 +.030"/-.000" L3 +.030"/-.000" D2 L1 4 FL PRICE
.125 (1/8) .625 1.250 (10x) 1/8 2-1/2 36608 114.90
.187 (3/16) 1.000 1.875 (10x) 3/16 3 36612 151.50
.250 (1/4) 1.250 2.500 (10x) 1/4 4 36616 168.20

Speeds & Feeds

Below you will find downloadable and printer-friendly Speeds & Feeds for this product line. All posted Speed & Feed parameters are suggested starting values that may be increased given optimal setup conditions. If you can't find the information you're looking for, Harvey Tool has a team of technical experts available to assist you. Please contact us at 800-645-5609 or tech@harveytool.com.

 

 

Ball Long Reach Long Flute - 3x Reach

Need To Place An Order? Find A Local Distributor

Machinists' Feedback

Used this tool? Share your experiences.

Create your own review

E-mail A Friend

Privacy Policy. All rights reserved. All Content Herein © 2017 Harvey Tool