Diamond End Mills for Non-Ferrous Materials - CVD Diamond - Ball - Long Reach, Stub Flute

Crystalline CVD Diamond End Mills - Ball Long Reach, Stub Flute Crystalline CVD Diamond End Mills - Ball Long Reach, Stub Flute
Diamond End Mills for Non-Ferrous Materials - CVD Diamond - Ball - Long Reach, Stub Flute


Outstanding in graphite!    
  • True crystalline CVD diamond on carbide substrate
  • Ideal for machining graphite and composites, green carbide and green ceramics
  • Maximum abrasion resistance increases tool life up to 50x
  • Reduced neck for clearance and maximum rigidity
  • 4 Flutes
  • h6 shank tolerance for high precision tool holders ​
  • Center cutting
  • CNC ground in the USA   

 

Jump to Product Reviews

Below are downloadable Simulation Files in DXF format (half-round line drawings) to accompany Harvey Tool products. Each file is specifically scaled to the geometry of the tool to help simulate running parameters and create tool paths. Like our speeds & feeds charts, these files will be continuously updated with the introduction of new products and new catalogs to assist operating the majority of our tools. Simulation files can also be accessed by searching for a specific tool number on the left-hand side of the website and then clicking on the Simulation table in the product table.
Please don’t hesitate to contact our tech team with any questions at 800-645-5609 or tech@harveytool.com.

To navigate between folders or download a file, DOUBLE CLICK on the folder or file.

CUTTER
DIAMETER
LENGTH
OF CUT
OVERALL
REACH
SHANK
DIAMETER
OVERALL
LENGTH
CVD DIAMOND
D1 +.000"/-.001" L2 +.010"/-.000" L3 +.010"/-.000" D2  L1 4 FL PRICE
.015 (1/64) .023 .078 (5x) 1/8 2-1/2 61015 102.60
.015 (1/64) .023 .125 (8x) 1/8 2-1/2 62015 102.60
.015 (1/64) .023 .156 (10x) 1/8 2-1/2 939515 105.30
.015 (1/64) .023 .187 (12x) 1/8 2-1/2 65215 105.30
.015 (1/64) .023 .225 (15x) 1/8 2-1/2 76015 110.60
.020 .030 .100 (5x) 1/8 2-1/2 61020 102.60
.020 .030 .160 (8x) 1/8 2-1/2 62020 102.60
.020 .030 .200 (10x) 1/8 2-1/2 939520 105.30
.020 .030 .250 (12x) 1/8 2-1/2 65220 105.30
.020 .030 .300 (15x) 1/8 2-1/2 76020 110.60
.025 .038 .125 (5x) 1/8 2-1/2 61025 102.60
.025 .038 .203 (8x) 1/8 2-1/2 62025 102.60
.025 .038 .312 (12x) 1/8 2-1/2 65225 105.30
.025 .038 .375 (15x) 1/8 2-1/2 76025 110.60
.031 (1/32) .047 .093 (3x) 1/8 1-1/2 922231 92.20
.031 (1/32) .047 .156 (5x) 1/8 2-1/2 61031 102.60
.031 (1/32) .047 .250 (8x) 1/8 2-1/2 62031 102.60
.031 (1/32) .047 .312 (10x) 1/8 2-1/2 939531 105.30
.031 (1/32) .047 .375 (12x) 1/8 2-1/2 65231 105.30
.031 (1/32) .047 .470 (15x) 1/8 2-1/2 76031 110.60
.039 (1 mm) .059 .203 (5x) 1/8 2-1/2 61039 102.60
.039 (1 mm) .059 .325 (8x) 1/8 2-1/2 62039 102.60
.040 .060 .325 (8x) 1/8 2-1/2 62040 102.60
.047 (3/64) .071 .250 (5x) 1/8 2-1/2 61047 102.60
.047 (3/64) .071 .375 (8x) 1/8 2-1/2 62047 102.60
.047 (3/64) .071 .480 (10x) 1/8 2-1/2 939547 105.30
.047 (3/64) .071 .570 (12x) 1/8 2-1/2 65247 105.30
.047 (3/64) .071 .710 (15x) 1/8 2-1/2 76047 110.60
.050 .075 .400 (8x) 1/8 2-1/2 62050 102.60
.060 .090 .500 (8x) 1/8 2-1/2 62060 102.60
.062 (1/16) .093 .186 (3x) 1/8 1-1/2 922262 81.60
.062 (1/16) .093 .312 (5x) 1/8 2-1/2 61062 92.10
.062 (1/16) .093 .500 (8x) 1/8 2-1/2 62062 92.10
.062 (1/16) .093 .625 (10x) 1/8 2-1/2 939562 94.70
.062 (1/16) .093 .750 (12x) 1/8 2-1/2 65262 94.70
.062 (1/16) .093 .950 (15x) 1/8 2-1/2 76062 99.60
.078 (5/64) .117 .406 (5x) 1/8 2-1/2 61078 92.10
.078 (5/64) .117 .625 (8x) 1/8 2-1/2 62078 92.10
.078 (5/64) .117 .800 (10x) 1/8 2-1/2 939578 94.70
.078 (5/64) .117 .940 (12x) 1/8 2-1/2 65278 94.70
.078 (5/64) .117 1.187 (15x) 1/8 2-1/2 76078 99.60
.093 (3/32) .140 .279 (3x) 1/8 1-1/2 922293 81.60
.093 (3/32) .140 .500 (5x) 1/8 2-1/2 61093 92.10
.093 (3/32) .140 .750 (8x) 1/8 2-1/2 62093 92.10
.093 (3/32) .140 .950 (10x) 1/8 2-1/2 939593 94.70
.093 (3/32) .140 1.125 (12x) 1/8 2-1/2 65293 94.70
.093 (3/32) .140 1.400 (15x) 1/8 2-1/2 76093 99.60
.100 .150 .800 (8x) 1/8 2-1/2 62100 92.10
.118 (3 mm) .177 .625 (5x) 1/8 2-1/2 61105 92.10
.118 (3 mm) .177 .950 (8x) 1/8 2-1/2 62105 92.10
D1 +.000"/-.002" L2 +.030"/-.000" L3 +.030"/-.000" D2  L1 4 FL PRICE
.125 (1/8) .187 .375 (3x) 1/8 1-1/2 64008 90.10
.125 (1/8) .187 .625 (5x) 1/8 2-1/2 61108 100.40
.125 (1/8) .187 1.000 (8x) 1/8 2-1/2 62108 100.40
.125 (1/8) .187 1.250 (10x) 1/8 2-1/2 939608 103.20
.125 (1/8) .187 1.500 (12x) 1/8 3 65308 103.20
.125 (1/8) .187 1.875 (15x) 1/8 3 944108 108.70
.156 (5/32) .235 .750 (5x) 3/16 3 61110 129.50
.156 (5/32) .235 1.250 (8x) 3/16 3 62110 129.50
.187 (3/16) .285 1.000 (5x) 3/16 3 61112 129.50
.187 (3/16) .285 1.500 (8x) 3/16 3 62112 129.50
.187 (3/16) .285 2.250 (12x) 3/16 4 65312 136.30
.250 (1/4) .375 1.250 (5x) 1/4 4 61116 143.90
.250 (1/4) .375 2.000 (8x) 1/4 4 62116 143.90
.250 (1/4) .375 3.000 (12x) 1/4 6 65316 150.10
.375 (3/8) .570 1.250 (3x) 3/8 2-1/2 64024 180.80
.500 (1/2) .750 1.500 (3x) 1/2 3 64032 268.60

Speeds & Feeds

Below you will find downloadable and printer-friendly Speeds & Feeds for this product line. All posted Speed & Feed parameters are suggested starting values that may be increased given optimal setup conditions. If you can't find the information you're looking for, Harvey Tool has a team of technical experts available to assist you. Please contact us at 800-645-5609 or tech@harveytool.com.

Ball Long Reach Stub Flute - 3x Reach

Ball Long Reach Stub Flute - 5x Reach

Ball Long Reach Stub Flute - 8x Reach

Ball Long Reach Stub Flute - 10x Reach

Ball Long Reach Stub Flute - 12x Reach

Ball Long Reach Stub Flute - 15x Reach

Need To Place An Order? Find A Local Distributor

Machinists' Feedback

One review for this product. Average rating: Rating StarRating StarRating StarRating StarRating Star

Create your own review

Rating StarRating StarRating StarRating StarRating Star   Disappointed again

By Brendon M. Port Huron, MI, United States, June 27, 2012

Although Harvey tool has the largest selection of small cutters, there cutting geomatry quality can be disappointing at times. Today I started cutting with a #62062 4 flute ball cutter. When I pulled the part out of the machine, there was chatter marks over the whole electrode. Upon inspection of the cutter, the two secondary flutes had what effectively was a negative rake angle at the tips. I have no cutter grinding experiance, but it appears that the negative rake was from where the grinding wheel brushed the secondary flutes while grinding the primary flutes. I have talked to Harvey Tools customer service about other quality issues, and they basicaly said take it up with the distributor. I no longer bother with calling Harvey Tool. Over the last 8 years of using Harvey Tooling, once a year I come across defective cutters. I've never come across defective cutters from [...]. How about shink fit tolerancing on your .125" shank tooling. The Cutter works fine when its a good cutter.

Reply From Harvey Tool

by The Engineering team at Harvey Tool -

At Harvey Tool, we are 100% committed to providing quality tools and outstanding customer service. As soon as we received Brendan’s review of our product, one of our application engineers reached out to him in order to better understand the problem with the tools. Thanks to the info we received, we were able to make some changes and improvements in the way the tools were manufactured in order to fix the issue. We take dissatisfied customers very seriously and appreciate the feedback because it gives us the opportunity to make it right.

3 of 4 people found the following review helpful:
Was this review helpful to you?  Yes | No

E-mail A Friend

Privacy Policy. All rights reserved. All Content Herein © 2017 Harvey Tool