Diamond End Mills for Non-Ferrous Materials - CVD Diamond - Corner Radius - Long Reach, Stub Flute

Crystalline CVD Diamond End Mills - Corner Radius Long Reach, Stub Flute Crystalline CVD Diamond End Mills - Corner Radius Long Reach, Stub Flute

Diamond End Mills for Non-Ferrous Materials - CVD Diamond - Corner Radius - Long Reach, Stub Flute

Outstanding in graphite!    

  • True crystalline CVD diamond on solid carbide substrate
  • Ideal for machining graphite and composites, green carbide, and green ceramics
  • Maximum abrasion resistance increases tool life up to 50x
  • Reduced neck for clearance and maximum rigidity
  • Corner radius for improved strength
  • 4 flutes
  • h6 shank tolerance for high precision tool holders ​
  • Center cutting
  • CNC ground in the USA  
Jump to Product Reviews

Below are downloadable Simulation Files in DXF format (half-round line drawings) to accompany Harvey Tool products. Each file is specifically scaled to the geometry of the tool to help simulate running parameters and create tool paths. Like our speeds & feeds charts, these files will be continuously updated with the introduction of new products and new catalogs to assist operating the majority of our tools. Simulation files can also be accessed by searching for a specific tool number on the left-hand side of the website and then clicking on the Simulation table in the product table.
Please don’t hesitate to contact our tech team with any questions at 800-645-5609 or tech@harveytool.com.

To navigate between folders or download a file, DOUBLE CLICK on the folder or file.

CUTTER
DIAMETER
CORNER
RADIUS
LENGTH
OF CUT
OVERALL
REACH
SHANK
DIAMETER
OVERALL
LENGTH
CVD DIAMOND
D1 +.000"/-.001" R +.001"/-.001" L2 +.010"/-.000" L3 +.010"/-.000" D2  L1 4 FL PRICE
.015 (1/64) .003 .023 .078 (5x) 1/8 2-1/2 61615 107.50
.015 (1/64) .003 .023 .125 (8x) 1/8 2-1/2 61915 107.50
.015 (1/64) .003 .023 .187 (12x) 1/8 2-1/2 62215 110.40
.020 .005 .030 .100 (5x) 1/8 2-1/2 62920 107.50
.020 .005 .030 .160 (8x) 1/8 2-1/2 63220 107.50
.020 .005 .030 .250 (12x) 1/8 2-1/2 64120 110.40
.025 .005 .038 .125 (5x) 1/8 2-1/2 62925 107.50
.025 .005 .038 .203 (8x) 1/8 2-1/2 63225 107.50
.025 .005 .038 .312 (12x) 1/8 2-1/2 64125 110.40
.031 (1/32) .005 .047 .156 (5x) 1/8 2-1/2 62931 107.50
.031 (1/32) .005 .047 .250 (8x) 1/8 2-1/2 63231 107.50
.031 (1/32) .005 .047 .375 (12x) 1/8 2-1/2 64131 110.40
.039 (1 mm) .005 .059 .203 (5x) 1/8 2-1/2 62939 107.50
.039 (1 mm) .005 .059 .325 (8x) 1/8 2-1/2 63239 107.50
.047 (3/64) .005 .071 .250 (5x) 1/8 2-1/2 62947 107.50
.047 (3/64) .005 .071 .375 (8x) 1/8 2-1/2 63247 107.50
.047 (3/64) .005 .071 .570 (12x) 1/8 2-1/2 64147 110.40
.062 (1/16) .010 .093 .312 (5x) 1/8 2-1/2 65062 96.50
.062 (1/16) .010 .093 .500 (8x) 1/8 2-1/2 66562 96.50
.062 (1/16) .010 .093 .750 (12x) 1/8 2-1/2 65962 99.20
.078 (5/64) .010 .117 .406 (5x) 1/8 2-1/2 65078 96.50
.078 (5/64) .010 .117 .625 (8x) 1/8 2-1/2 66578 96.50
.078 (5/64) .010 .117 .940 (12x) 1/8 2-1/2 65978 99.20
.093 (3/32) .010 .140 .500 (5x) 1/8 2-1/2 65093 96.50
.093 (3/32) .010 .140 .750 (8x) 1/8 2-1/2 66593 96.50
.093 (3/32) .010 .140 1.125 (12x) 1/8 2-1/2 65993 99.20
.118 (3 mm) .010 .177 .625 (5x) 1/8 2-1/2 916305 96.50
.118 (3 mm) .010 .177 .950 (8x) 1/8 2-1/2 914705 96.50
 
D1 +.000"/-.002" R +.001"/-.001" L2 +.030"/-.000" L3 +.030"/-.000"   D2  L1 4 FL PRICE
.125 (1/8) .015 .187 .625 (5x) 1/8 2-1/2 66208 105.20
.125 (1/8) .015 .187 1.000 (8x) 1/8 2-1/2 64708 105.20
.125 (1/8) .015 .187 1.500 (12x) 1/8 3 66408 108.20
.187 (3/16) .030 .285 1.000 (5x) 3/16 3 63312 135.70
.187 (3/16) .030 .285 1.500 (8x) 3/16 3 65612 135.70
.250 (1/4) .030 .375 1.250 (5x) 1/4 4 63316 150.90
.250 (1/4) .030 .375 2.000 (8x) 1/4 4 65616 150.90

Speeds & Feeds

Below you will find downloadable and printer-friendly Speeds & Feeds for this product line. All posted Speed & Feed parameters are suggested starting values that may be increased given optimal setup conditions. If you can't find the information you're looking for, Harvey Tool has a team of technical experts available to assist you. Please contact us at 800-645-5609 or tech@harveytool.com.

 

 

Corner Radius Long Reach Stub Flute - 5x Reach

Corner Radius Long Reach Stub Flute - 8x Reach

Corner Radius Long Reach Stub Flute - 12x Reach

Need To Place An Order? Find A Local Distributor

Machinists' Feedback

Used this tool? Share your experiences.

Create your own review

E-mail A Friend

Privacy Policy. All rights reserved. All Content Herein © 2017 Harvey Tool