Diamond End Mills for Non-Ferrous Materials - CVD Diamond - Square

Diamond End Mills for Non-Ferrous Materials - CVD Diamond - Square

Outstanding in graphite!    

  •  True crystalline CVD diamond on solid carbide substrate
  •  Ideal for machining graphite and composites, green carbide and green ceramics   
  •  Maximum abrasion resistance increases tool life up to 50x  
  •  4 flutes
  • h6 shank tolerance for high precision tool holders ​
  •  Center cutting
  • CNC ground in the USA  
Jump to Product Reviews

Below are downloadable Simulation Files in DXF format (half-round line drawings) to accompany Harvey Tool products. Each file is specifically scaled to the geometry of the tool to help simulate running parameters and create tool paths. Like our speeds & feeds charts, these files will be continuously updated with the introduction of new products and new catalogs to assist operating the majority of our tools. Simulation files can also be accessed by searching for a specific tool number on the left-hand side of the website and then clicking on the Simulation table in the product table.
Please don’t hesitate to contact our tech team with any questions at 800-645-5609 or tech@harveytool.com.

To navigate between folders or download a file, DOUBLE CLICK on the folder or file.

  • Amorphous Diamond
  • Uncoated
CUTTER
DIAMETER
LENGTH
OF CUT
SHANK
DIAMETER
OVERALL
LENGTH
CVD DIAMOND
D1 +.000"/-.001" L2 +.010"/-.000" D2 (h6)
L1 4 FL PRICE
.015 (1/64) .023 (1.5x) 1/8 1-1/2 962715 70.60
.015 (1/64) .045 (3x) 1/8 1-1/2 995715 70.60
.015 (1/64) .078 (5x) 1/8 2-1/2 936615 79.80
.020 .060 (3x) 1/8 1-1/2 995720 70.60
.031 (1/32) .047 (1.5x) 1/8 1-1/2 962731 70.60
.031 (1/32) .093 (3x) 1/8 1-1/2 995731 70.60
.031 (1/32) .156 (5x) 1/8 2-1/2 936631 79.80
.039 (1 mm) .117 (3x) 1/8 1-1/2 995739 70.60
.040 .120 (3x) 1/8 1-1/2 995740 70.60
.040 .203 (5x) 1/8 2-1/2 936640 79.80
.047 (3/64) .071 (1.5x) 1/8 1-1/2 962747 70.60
.047 (3/64) .141 (3x) 1/8 1-1/2 995747 70.60
.047 (3/64) .250 (5x) 1/8 2-1/2 936647 79.80
.050 .150 (3x) 1/8 1-1/2 995750 70.60
.050 .250 (5x) 1/8 2-1/2 936650 79.80
.060 .180 (3x) 1/8 1-1/2 995760 70.60
.060 .312 (5x) 1/8 2-1/2 936660 79.80
.062 (1/16) .093 (1.5x) 1/8 1-1/2 962762 70.10
.062 (1/16) .186 (3x) 1/8 1-1/2 995762 70.10
.062 (1/16) .312 (5x) 1/8 2-1/2 936662 79.50
.078 (5/64) .118 (1.5x) 1/8 1-1/2 962778 70.10
.078 (5/64) .234 (3x) 1/8 1-1/2 995778 70.10
.078 (5/64) .406 (5x) 1/8 2-1/2 936678 79.50
.093 (3/32) .140 (1.5x) 1/8 1-1/2 962793 70.10
.093 (3/32) .279 (3x) 1/8 1-1/2 995793 70.10
.093 (3/32) .500 (5x) 1/8 2-1/2 936693 79.50
.100 .300 (3x) 1/8 1-1/2 995800 70.10
.118 (3 mm) .354 (3x) 1/8 1-1/2 995805 70.10







D1 +.000"/-.002" L2 +.030"/-.000"
D2 L1 4 FL PRICE
.125 (1/8) .187 (1.5x) 1/8 1-1/2 962808 71.30
.125 (1/8) .375 (3x) 1/8 1-1/2 995808 71.30
.125 (1/8) .625 (5x) 1/8 2-1/2 936708 79.80
.156 (5/32) .235 (1.5x) 3/16 2 962810 89.50
.156 (5/32) .470 (3x) 3/16 2 995810 89.50
.187 (3/16) .285 (1.5x) 3/16 2 962812 89.50
.187 (3/16) .570 (3x) 3/16 2 995812 89.50
.187 (3/16) 1.000 (5x) 3/16 3 936712 113.80
.250 (1/4) .375 (1.5x) 1/4 2-1/2 962816 119.30
.250 (1/4) .750 (3x) 1/4 2-1/2 995816 119.30
.250 (1/4) 1.250 (5x) 1/4 4 936716 128.20
.375 (3/8) .570 (1.5x) 3/8 2-1/2 962824 143.20
.500 (1/2) .750 (1.5x) 1/2 3 962832 230.90

Speeds & Feeds

Below you will find downloadable and printer-friendly Speeds & Feeds for this product line. All posted Speed & Feed parameters are suggested starting values that may be increased given optimal setup conditions. If you can't find the information you're looking for, Harvey Tool has a team of technical experts available to assist you. Please contact us at 800-645-5609 or tech@harveytool.com.

 

 

Square - 1.5x LOC, 4 Flute

Square - 3x LOC, 4 Flute

Square - 5x LOC, 4 Flute

Need To Place An Order? Find A Local Distributor

Machinists' Feedback

Used this tool? Share your experiences.

Create your own review

E-mail A Friend

Privacy Policy. All rights reserved. All Content Herein © 2017 Harvey Tool