End Mills for Plastics - Square Upcut - Single Flute

Plastic Cutting End Mills - Square Upcut Single Flute Crystalline CVD Diamond End Mills - Corner Radius Long Reach, Stub Flute

Carbide End Mills for Plastics - Square Upcut - Single Flute

 

  • 2x the material removal with improved finish over standard end mills!
  • Design allows for maximum stock removal while maintaining excellent finish
  • High rake, high relief design produces sharper edge for improved shearing action while transferring heat into the chip
  • Large flute valley creates room for the chip and aids in chip evacuation
  • Slower helix reduces lifting forces, making design preferable for fiber-reinforced applications and vacuum table setups
  • Select sizes available with oversized, router-style shanks
  • High flute finish resists chip welding
  • Will ramp or plunge if required
  • Right hand spiral, right hand cut
  • Solid carbide
  • CNC ground in the USA  

    Learn more about the features, benefits, and applications of Harvey Tool Plastic Cutting End Mills

 

Jump to Product Reviews

Below are downloadable Simulation Files in DXF format (half-round line drawings) to accompany Harvey Tool products. Each file is specifically scaled to the geometry of the tool to help simulate running parameters and create tool paths. Like our speeds & feeds charts, these files will be continuously updated with the introduction of new products and new catalogs to assist operating the majority of our tools. Simulation files can also be accessed by searching for a specific tool number on the left-hand side of the website and then clicking on the Simulation table in the product table.
Please don’t hesitate to contact our tech team with any questions at 800-645-5609 or tech@harveytool.com.

To navigate between folders or download a file, DOUBLE CLICK on the folder or file.

  • Amorphous Diamond
  • Uncoated
CUTTER
DIAMETER
LENGTH
OF CUT
SHANK
DIAMETER
OAL SOFT PLASTICS HARD PLASTICS HARD PLASTICS
AMORPHOUS DIAMOND
D1 +000"/-.001" L2 +010"/-.000" D2 L1 1 FL PRICE 1 FL PRICE 1 FL PRICE
1/32 3/32 (3x) 1/8 1-1/2 51431 28.70
1/32 5/32 (5x) 1/8 1-1/2 52431 35.20
3/64 9/64 (3x) 1/8 1-1/2 51447 25.60
3/64 1/4 (5x) 1/8 1-1/2 52447 29.70
D1 +000"/-.002" L2 +030"/-.000" D2 L1 1 FL PRICE 1 FL PRICE 1 FL PRICE
1/16 3/16 (3x) 1/8 1-1/2 51162 20.90 51462 20.90 51462-C4 31.40
1/16 1/4 (4x) 1/4* 2 14104-20 29.80 14204-20 29.80
1/16 5/16 (5x) 1/8 2 51862 24.70 52462 24.70 52462-C4 35.20
5/64 15/64 (3x) 1/8 1-1/2 51178 20.90 51478 20.90 51478-C4 31.40
5/64 5/16 (4x) 1/4* 2 14105-20 29.80 14205-20 29.80
5/64 13/32 (5x) 1/8 2 51878 24.70 52478 24.70 52478-C4 35.20
3/32 9/32 (3x) 1/8 1-1/2 51193 20.90 51493 20.90 51493-C4 31.40
3/32 3/8 (4x) 1/4* 2 14106-20 29.80 14206-20 29.80
3/32 1/2 (5x) 1/8 2 51893 24.70 52493 24.70 52493-C4 35.20
1/8 1/4 (2x) 1/4* 2 14108-10 28.30 14208-10 28.30
1/8 3/8 (3x) 1/8 1-1/2 51208 20.90 51508 20.90 51508-C4 31.40
1/8 1/2 (4x) 1/4* 2 14108-20 28.30 14208-20 28.30
1/8 5/8 (5x) 1/8 2 51908 24.70 52508 24.70 52508-C4 35.20
5/32 5/8 (4x) 1/4* 2 14110-20 28.30 14210-20 28.30
5/32 3/4 (5x) 3/16 3 52510 32.90
3/16 3/8 (2x) 1/4* 2 14112-10 28.30 14212-10 28.30
3/16 9/16 (3x) 3/16 2 51212 26.80 51512 26.80 51512-C4 41.30
3/16 5/8 (3x) 1/4* 2 14112-20 28.30 14212-20 28.30
3/16 1 (5x) 3/16 3 51912 32.90 52512 32.90 52512-C4 47.40
1/4 3/4 (3x) 1/4 2-1/2 51216 28.30 51516 28.30 51516-C4 44.80
1/4 1-1/4 (5x) 1/4 3 51916 36.70 52516 36.70 52516-C4 53.20
3/8 1-1/8 (3x) 3/8 2-1/2 51224 57.50 51524 57.50
3/8 2 (5x) 3/8 4 51924 63.80 52524 63.80
1/2 1-1/2 (3x) 1/2 3 51232 98.20 51532 98.20
1/2 2-5/8 (5x) 1/2 5 51932 162.10 52532 162.10
*Cutter diameter tolerance is +.000/-.004". Tools are ground on oversized, router-style shank.

Speeds & Feeds

Below you will find downloadable and printer-friendly Speeds & Feeds for this product line. All posted Speed & Feed parameters are suggested starting values that may be increased given optimal setup conditions. If you can't find the information you're looking for, Harvey Tool has a team of technical experts available to assist you. Please contact us at 800-645-5609 or tech@harveytool.com.

 

 

Square Upcut Single Flute - Soft Plastic, 3x LOC

Square Upcut Single Flute - Soft Plastic, 3x LOC, Router Style

Square Upcut Single Flute - Soft Plastic, 5x LOC

Square Upcut Single Flute - Hard Plastic, 3x LOC

Square Upcut, Single Flute - Hard Plastic, 3x LOC, Router Style

Square Upcut Single Flute - Hard Plastic, 5x LOC


Why use Plastic Cutting End Mills vs. Metal Cutting End Mills?



Soft Plastics vs. Hard Plastics:

Need To Place An Order? Find A Local Distributor

Machinists' Feedback

Used this tool? Share your experiences.

Create your own review

E-mail A Friend

Privacy Policy. All rights reserved. All Content Herein © 2017 Harvey Tool