End Mills - Square Reduced Shank

End Mills - Square Reduced Shank Chuck at any depth!
Carbide End Mills - Square Reduced Shank

  • Reduced straight shank allows any chucking depth
  • Solid carbide construction for maximum rigidity
  • Long length design for deep cavity machining
  • Length of cut = 1 1/2x diameter
  • Center cutting
  • 4 flutes
  • Solid Carbide
  • CNC ground in the USA   
Jump to Product Reviews

Below are downloadable Simulation Files in DXF format (half-round line drawings) to accompany Harvey Tool products. Each file is specifically scaled to the geometry of the tool to help simulate running parameters and create tool paths. Like our speeds & feeds charts, these files will be continuously updated with the introduction of new products and new catalogs to assist operating the majority of our tools. Simulation files can also be accessed by searching for a specific tool number on the left-hand side of the website and then clicking on the Simulation table in the product table.
Please don’t hesitate to contact our tech team with any questions at 800-645-5609 or tech@harveytool.com.

To navigate between folders or download a file, DOUBLE CLICK on the folder or file.

CUTTER DIAMETER LENGTH OF CUT SHANK DIAMETER OVERALL LENGTH UNCOATED AlTiN COATED
D1 +.000"/
-.002"
L2 +.030"/
-.000"
D2 L1 4 FL PRICE 4 FL PRICE
5/32 15/64 1/8 2-1/2 943210 72.10 943210-C3 77.10
3/16 9/32 1/8 2-1/2 943212 72.10 943212-C3 77.10
1/4 3/8 3/16 3 943216 78.20 943216-C3 84.20
5/16 15/32 1/4 4 943220 95.90 943220-C3 104.40
3/8 9/16 5/16 4 943224 113.40 943224-C3 124.90
1/2 3/4 7/16 6 943232 174.30 943232-C3 187.80

Speeds & Feeds

Below you will find downloadable and printer-friendly Speeds & Feeds for this product line. All posted Speed & Feed parameters are suggested starting values that may be increased given optimal setup conditions. If you can't find the information you're looking for, Harvey Tool has a team of technical experts available to assist you. Please contact us at 800-645-5609 or tech@harveytool.com.

Square - End Mills

End Mills - Square Reduced Shank

 

 

Need To Place An Order? Find A Local Distributor

Machinists' Feedback

Used this tool? Share your experiences.

Create your own review

E-mail A Friend

Privacy Policy. All rights reserved. All Content Herein © 2015 Harvey Tool
/* */