Helical Solutions
Facebook Instagram LinkedIn Twitter YouTube

Engraving Cutters - Tip Radius for Hardened Steel

Photo is an illustration of an exemplary tool


Carbide Engraving Cutters - Tip Radius for Hardened Steel


  • Designed for engraving hardened steel 46-68Rc
  • 91°+ for increased strength and effective chip evacuation
  • Eccentric relief for increased wear resistance and tool life
  • Radius on tip creates radius in the bottom of groove and improves strength
  • Single flute relieved for right hand milling
  • Latest generation AlTiN Nano coating offers superior hardness and heat resistance
  • Select carbide grade for improved edge retention
  • CNC ground in the USA

Jump to Product Reviews

Below are downloadable Simulation Files in DXF format (half-round line drawings) to accompany Harvey Tool products. Each file is specifically scaled to the geometry of the tool to help simulate running parameters and create tool paths. Like our speeds & feeds charts, these files will be continuously updated with the introduction of new products and new catalogs to assist operating the majority of our tools. Simulation files can also be accessed by searching for a specific tool number on the left-hand side of the website and then clicking on the Simulation table in the product table.
Please don’t hesitate to contact our tech team with any questions at 800-645-5609 or tech@harveytool.com.

To navigate between folders or download a file, DOUBLE CLICK on the folder or file.

  • AlTiN Nano
30° 1/4 .010 .438 II 2-1/2 906716-C6 38.70
60° 1/4 .010 .207 II 2-1/2 900916-C6 38.70
90° 1/8 .005 .060 II 1-1/2 923408-C6 24.90
1/8 .010 .058 II 1-1/2 918908-C6 24.90
1/4 .010 .121 II 2-1/2 918916-C6 38.70

Speeds & Feeds

Below you will find downloadable and printer-friendly Speeds & Feeds for this product line. All posted Speed & Feed parameters are suggested starting values that may be increased given optimal setup conditions. If you can't find the information you're looking for, Harvey Tool has a team of technical experts available to assist you. Please contact us at 800-645-5609 or tech@harveytool.com.


Tip Radius for Hardened Steel

Below, please find additional technical resources related to this product line.

Depths Widths Chart - Radiused Engravers 

Angles Untangled
Includes angle conversion charts for all Engraving Cutter angles.

If you require additional information, Harvey Tool has a team of technical experts available to assist you through even the most challenging applications. Please contact us at 800-645-5609 or 

Need To Place An Order? Find A Local Distributor

Machinists' Feedback

Used this tool? Share your experiences.

Create your own review

E-mail A Friend

Privacy Policy. All rights reserved. All Content Herein © 2017 Harvey Tool