Miniature Drills

Miniature Drills Miniature Drills
Carbide Miniature Drills

 

  • Miniature drills down to .002"
  • For tools .020˝ and smaller, there is an intermediate neck diameter as pictured above
  • 130° drill point
  • Solid carbide
  • CNC ground in Germany
Jump to Product Reviews

Below are downloadable Simulation Files in DXF format (half-round line drawings) to accompany Harvey Tool products. Each file is specifically scaled to the geometry of the tool to help simulate running parameters and create tool paths. Like our speeds & feeds charts, these files will be continuously updated with the introduction of new products and new catalogs to assist operating the majority of our tools. Simulation files can also be accessed by searching for a specific tool number on the left-hand side of the website and then clicking on the Simulation table in the product table.
Please don’t hesitate to contact our tech team with any questions at 800-645-5609 or tech@harveytool.com.

To navigate between folders or download a file, DOUBLE CLICK on the folder or file.

  • AlTiN
  • Uncoated
DRILL
DIAMETER
FLUTE
LENGTH
SHANK
DIAMETER
OVERALL
LENGTH
UNCOATED AlTiN COATED
inch wire mm      
D1 +.0000"/-.0003" *     L2 D2 L1 TOOL #  PRICE TOOL # PRICE
.0020   .050 mm .028 1/8 1-1/2 20020 30.50    
.0039 #102 .100 mm .039 1/8 1-1/2 20039 21.30    
.0051 #99 .130 mm .056 1/8 1-1/2 20051 21.30    
.0059 #97 .150 mm .066 1/8 1-1/2 20059 19.60    
.0063 #96   .066 1/8 1-1/2 20063 19.60    
.0069   .175 mm .066 1/8 1-1/2 20069 19.60    
.0071 #94   .106 1/8 1-1/2 20071 17.80    
.0075 #93   .106 1/8 1-1/2 20075 17.80    
.0079 #92 .200 mm .160 1/8 1-1/2 20079 14.50    
.0083 #91   .160 1/8 1-1/2 20083 14.50    
.0087 #90   .126 1/8 1-1/2 20087 14.50    
.0089   .225 mm .160 1/8 1-1/2 20089 14.50    
.0091 #89   .160 1/8 1-1/2 20091 14.10    
.0095 #88   .160 1/8 1-1/2 20095 14.10    
.0098 .250 mm .160 1/8 1-1/2 20098 14.10    
.0100  #87   .160 1/8 1-1/2 20100 14.10 20100-C3 18.10
.0108 .275 mm .160 1/8 1-1/2 20108 14.10 20108-C3 18.10
.0110 #85   .160 1/8 1-1/2 20110 14.10 20110-C3 18.10
.0115 #84   .180 1/8 1-1/2 20115 14.10 20115-C3 18.10
.0118   .300 mm .180 1/8 1-1/2 20118 14.10 20118-C3 18.10
.0120 #83   .230 1/8 1-1/2 20120 12.40 20120-C3 16.40
.0130 #81   .230 1/8 1-1/2 20130 12.40 20130-C3 16.40
.0135 #80   .270 1/8 1-1/2 20135 12.10 20135-C3 16.10
.0138   .350 mm .270 1/8 1-1/2 20138 12.10 20138-C3 16.10
.0145 #79   .270 1/8 1-1/2 20145 12.10 20145-C3 16.10
.0157   .400 mm .270 1/8 1-1/2 20157 12.10 20157-C3 16.10
.0160 #78   .270 1/8 1-1/2 20160 12.10 20160-C3 16.10
.0168     .270 1/8 1-1/2 20168 12.10 20168-C3 16.10
.0177 .450 mm .270 1/8 1-1/2 20177 12.10 20177-C3 16.10
.0180 #77   .270 1/8 1-1/2 20180 11.20 20180-C3 15.20
.0197 .500 mm .275 1/8 1-1/2 20197 11.20 20197-C3 15.20
.0200 #76   .275 1/8 1-1/2 20200 11.20 20200-C3 15.20
.0210 #75   .275 1/8 1-1/2 20205 11.20 20205-C3 15.20
.0225 #74   .275 1/8 1-1/2 20210 11.20 20210-C3 15.20
.0236 .600 mm .275 1/8 1-1/2 20214 11.20 20214-C3 15.20
.0240 #73   .275 1/8 1-1/2 20215 11.20 20215-C3 15.20
.0250 #72   .275 1/8 1-1/2 20220 11.20 20220-C3 15.20
.0260 #71   .275 1/8 1-1/2 20225 11.20 20225-C3 15.20
.0276 .700 mm .335 1/8 1-1/2 20229 11.20 20229-C3 15.20
.0280 #70   .335 1/8 1-1/2 20230 11.20 20230-C3 15.20
.0292 #69   .335 1/8 1-1/2 20235 11.20 20235-C3 15.20
.0302     .395 1/8 1-1/2 20240 11.20 20240-C3 15.20
.0310 #68   .395 1/8 1-1/2 20245 10.30 20245-C3 14.30
.0312 (1/32)     .395 1/8 1-1/2 20250 10.30 20250-C3 14.30
.0315 .800 mm .395 1/8 1-1/2 20253 10.30 20253-C3 14.30
.0320 #67   .395 1/8 1-1/2 20255 10.30 20255-C3 14.30
.0330 #66   .395 1/8 1-1/2 20260 10.30 20260-C3 14.30
.0350 #65   .395 1/8 1-1/2 20265 10.30 20265-C3 14.30
.0354 .900 mm .395 1/8 1-1/2 20267 10.30 20267-C3 14.30
.0360 #64   .395 1/8 1-1/2 20270 10.30 20270-C3 14.30
.0370 #63   .395 1/8 1-1/2 20275 10.30 20275-C3 14.30
.0380 #62   .395 1/8 1-1/2 20280 10.30 20280-C3 14.30
.0390 #61   .395 1/8 1-1/2 20285 10.30 20285-C3 14.30
.0394   1.000 mm .395 1/8 1-1/2 20290 10.30 20290-C3 14.30
.0400 #60   .395 1/8 1-1/2 20295 10.30 20295-C3 14.30
.0410 #59   .395 1/8 1-1/2 20300 10.30 20300-C3 14.30
.0420 #58   .395 1/8 1-1/2 20305 10.30 20305-C3 14.30
.0430 #57   .395 1/8 1-1/2 20310 10.30 20310-C3 14.30
.0433 1.100 mm .395 1/8 1-1/2 20311 10.30 20311-C3 14.30
.0440     .395 1/8 1-1/2 20315 10.30 20315-C3 14.30
.0465 #56   .395 1/8 1-1/2 20320 10.30 20320-C3 14.30
.0469 (3/64)     .395 1/8 1-1/2 20325 10.30 20325-C3 14.30
.0472 1.200 mm .395 1/8 1-1/2 20327 10.30 20327-C3 14.30
.0492   1.250 mm .395 1/8 1-1/2 20330 10.30 20330-C3 14.30
.0500 1.270 mm .395 1/8 1-1/2 20332 10.30 20332-C3 14.30
.0512   1.300 mm .413 1/8 1-1/2 20335 10.30 20335-C3 14.30
.0520 #55   .413 1/8 1-1/2 20340 10.30 20340-C3 14.30
.0531   1.350 mm .413 1/8 1-1/2 20345 10.30 20345-C3 14.30
.0550 #54   .413 1/8 1-1/2 20350 10.30 20350-C3 14.30
.0571   1.450 mm .413 1/8 1-1/2 20355 10.30 20355-C3 14.30
.0591 1.500 mm .413 1/8 1-1/2 20360 10.30 20360-C3 14.30
.0595 #53   .413 1/8 1-1/2 20365 10.30 20365-C3 14.30
.0610 1.550 mm .413 1/8 1-1/2 20370 10.30 20370-C3 14.30
.0625 (1/16)     .413 1/8 1-1/2 20375 10.30 20375-C3 14.30
    D1 +.0000"/-.0005" ** L2 D2 L1 TOOL #  PRICE TOOL # PRICE
.0630   1.600 mm .413 1/8 1-1/2 20376 10.30 20376-C3 14.30
.0635 #52   .413 1/8 1-1/2 20377 10.30 20377-C3 14.30
.0670 #51   .413 1/8 1-1/2 20384 10.30 20384-C3 14.30
.0700 #50   .413 1/8 1-1/2 20390 10.30 20390-C3 14.30
.0730 #49   .413 1/8 1-1/2 20396 10.30 20396-C3 14.30
.0760 #48   .413 1/8 1-1/2 20402 10.30 20402-C3 14.30
.0781 (5/64)   .413 1/8 1-1/2 20407 10.30 20407-C3 14.30
.0785 #47   .413 1/8 1-1/2 20408 10.30 20408-C3 14.30
.0787 2.000 mm .413 1/8 1-1/2 20409 10.30 20409-C3 14.30
.0810 #46   .413 1/8 1-1/2 20414 10.30 20414-C3 14.30
.0820 #45   .413 1/8 1-1/2 20416 10.30 20416-C3 14.30
.0860 #44   .413 1/8 1-1/2 20424 10.30 20424-C3 14.30
.0890 #43   .413 1/8 1-1/2 20430 10.30 20430-C3 14.30
.0935 #42   .413 1/8 1-1/2 20439 10.30 20439-C3 14.30
.0938 (3/32)   .413 1/8 1-1/2 20440 10.30 20440-C3 14.30
.0960 #41   .413 1/8 1-1/2 20445 10.30 20445-C3 14.30
.0980 #40   .413 1/8 1-1/2 20449 10.30 20449-C3 14.30
.0984   2.500 mm .413 1/8 1-1/2 20450 10.30 20450-C3 14.30
.0995 #39   .413 1/8 1-1/2 20453 10.30 20453-C3 14.30
.1015 #38   .413 1/8 1-1/2 20457 10.30 20457-C3 14.30
.1040 #37   .413 1/8 1-1/2 20462 10.30 20462-C3 14.30
.1065 #36   .413 1/8 1-1/2 20467 10.30 20467-C3 14.30
.1094 (7/64)   .413 1/8 1-1/2 20473 10.30 20473-C3 14.30
.1100 #35   .413 1/8 1-1/2 20475 10.30 20475-C3 14.30
.1110 #34   .413 1/8 1-1/2 20477 10.30 20477-C3 14.30
.1130 #33   .413 1/8 1-1/2 20481 10.30 20481-C3 14.30
.1160 #32   .413 1/8 1-1/2 20487 10.30 20487-C3 14.30
.1181   3.000 mm .413 1/8 1-1/2 20491 10.30 20491-C3 14.30
.1200 #31   .413 1/8 1-1/2 20493 10.30 20493-C3 14.30
.1250 (1/8)     .413 1/8 1-1/2 20498 10.30 20498-C3 14.30
* Tolerance listed above refers to uncoated drills. Tolerance for AlTiN coating is +.0002"/−.0003".
** Diameters .0630" and larger, tolerance for AlTiN coating is +.0002"/-.0005".

Speeds & Feeds

Below you will find downloadable and printer-friendly Speeds & Feeds for this product line. All posted Speed & Feed parameters are suggested starting values that may be increased given optimal setup conditions. If you can't find the information you're looking for, Harvey Tool has a team of technical experts available to assist you. Please contact us at 800-645-5609 or tech@harveytool.com.

Miniature Drills

Miniature Drills

 

 

Harvey Tool offers a wide assortment of specialty End Mills in a variety of sizes and lengths of cut. You may find our Advanced Search feature helpful to locate the best stock tool for your application. The Advanced Search allows you to select your critical dimensions to narrow your search. However, if you are looking for a tool that we don’t offer as a standard, we can provide you with a special custom tool. Simply fill out the Request for Quote (RFQ) Template that best represents the tool you need, and submit via email or fax. One of our technical experts will get back to you. If you need help designing your special tool, you can contact our Quotations Department.

Phone - 978-948-8555 ext. 6004 - Ask for our Quotations Department.
RFQ Fax - 978-948-8560
Email - tech@harveytool.com.


Special RFQ - Miniature Drills

Need To Place An Order? Find A Local Distributor

Machinists' Feedback

Used this tool? Share your experiences.

Create your own review

E-mail A Friend

Privacy Policy. All rights reserved. All Content Herein © 2015 Harvey Tool
/* */