Miniature End Mills - Square Long Reach, Long Flute

Miniature End Mills - Square Long Reach, Long Flute Miniature End Mills - Square Long Reach, Long Flute
Carbide Miniature End Mills - Square Long Reach, Long Flute

 

  • Long length design for deep cavities
  • Long flutes for deep pocket milling
  • Length of cut is ≥ 5x diameter
  • 3 flutes
  • Center cutting
  • Solid carbide
  • CNC ground in the USA  
Jump to Product Reviews

Below are downloadable Simulation Files in DXF format (half-round line drawings) to accompany Harvey Tool products. Each file is specifically scaled to the geometry of the tool to help simulate running parameters and create tool paths. Like our speeds & feeds charts, these files will be continuously updated with the introduction of new products and new catalogs to assist operating the majority of our tools. Simulation files can also be accessed by searching for a specific tool number on the left-hand side of the website and then clicking on the Simulation table in the product table.
Please don’t hesitate to contact our tech team with any questions at 800-645-5609 or tech@harveytool.com.

To navigate between folders or download a file, DOUBLE CLICK on the folder or file.

  • AlTiN Coated
  • Amorphous Diamond
  • Uncoated
CUTTER DIA. LENGTH OF CUT OVERALL
REACH
SHANK DIA. OAL UNCOATED AlTiN COATED AMORPHOUS DIAMOND
D1 +.0005"/-.0005" L2 +.010"/-.000" L3 +.010"/-.000" D2 L1 3 FL PRICE 3 FL PRICE 3 FL PRICE
.010 .050 .100 (10x) 1/8 2-1/2 13610 41.90 13610-C3 46.10 10010 52.60
.010 .050 .150 (15x) 1/8 2-1/2 948210 51.70 948210-C3 55.90    
.015 (1/64) .075 .150 (10x) 1/8 2-1/2 13615 34.40 13615-C3 38.60 10015 45.10
.015 (1/64) .075 .225 (15x) 1/8 2-1/2 948215 44.40 948215-C3 48.60    
.020 (.5 mm) .100 .200 (10x) 1/8 2-1/2 13620 33.20 13620-C3 37.40 10020 43.90
.020 (.5 mm) .100 .300 (15x) 1/8 2-1/2 948220 42.90 948220-C3 47.10    
.025 .125 .250 (10x) 1/8 2-1/2 13625 31.90 13625-C3 36.10 10025 42.60
.030 .150 .300 (10x) 1/8 2-1/2 13630 31.90 13630-C3 36.10 10030 42.60
.030 .150 .450 (15x) 1/8 2-1/2 948230 41.50 948230-C3 45.70    
.031 (1/32) .155 .310 (10x) 1/8 2-1/2 13631 31.90 13631-C3 36.10 10031 42.60
.031 (1/32) .155 .470 (15x) 1/8 2-1/2 948231 41.50 948231-C3 45.70    
.035 (.9 mm) .175 .350 (10x) 1/8 2-1/2 13635 31.90 13635-C3 36.10 10035 42.60
.040 .200 .400 (10x) 1/8 2-1/2 13640 31.90 13640-C3 36.10 10040 42.60
.040 .200 .600 (15x) 1/8 2-1/2 948240 41.50 948240-C3 45.70    
.045 .225 .450 (10x) 1/8 2-1/2 13645 31.20 13645-C3 35.40 10045 41.90
.047 (3/64) .250 .500 (10x) 1/8 2-1/2 13647 31.20 13647-C3 35.40 10047 41.90
.047 (3/64) .250 .710 (15x) 1/8 2-1/2 948247 39.40 948247-C3 43.60    
.050 .300 .500 (10x) 1/8 2-1/2 956350 31.20 956350-C3 35.40    
.050 .300 .600 (12x) 1/8 2-1/2 13650 31.20 13650-C3 35.40 10050 41.90
.050 .300 .750 (15x) 1/8 2-1/2 948250 39.40 948250-C3 43.60    
.055 (1.4 mm) .385 .770 (14x) 1/8 2-1/2 13655 31.20 13655-C3 35.40 10055 41.90
.060 .312 .625 (10x) 1/8 2-1/2 956360 31.20 956360-C3 35.40    
.060 .500 1.000 (16x) 1/8 2-1/2 13660 31.50 13660-C3 35.70 10060 42.20
.062 (1/16) .312 .625 (10x) 1/8 2-1/2 956362 31.20 956362-C3 35.40    
.062 (1/16) .500 1.000 (16x) 1/8 2-1/2 13662 31.50 13662-C3 35.70 10062 42.20
.065 .500 1.000 (15x) 1/8 2-1/2 13665 31.20 13665-C3 35.40 10065 41.90
.070 .500 1.000 (14x) 1/8 2-1/2 13670 31.20 13670-C3 35.40 10070 41.90
.075 .500 1.000 (13x) 1/8 2-1/2 13675 31.20 13675-C3 35.40 10075 41.90
.078 (5/64) .406 .800 (10x) 1/8 2-1/2 956378 31.20 956378-C3 35.40    
.078 (5/64) .500 1.000 (12x) 1/8 2-1/2 13678 31.20 13678-C3 35.40 10078 41.90
.078 (5/64) .406 1.187 (15x) 1/8 2-1/2 948278 39.40 948278-C3 43.60    
.080 .750 1.250 (15x) 1/8 2-1/2 13680 31.50 13680-C3 35.70 10080 42.20
.085 .750 1.250 (14x) 1/8 2-1/2 13685 31.50 13685-C3 35.70 10085 42.20
.090 .750 1.250 (13x) 1/8 2-1/2 13690 31.50 13690-C3 35.70 10090 42.20
.093 (3/32) .500 .950 (10x) 1/8 2-1/2 956393 31.20 956393-C3 35.40    
.093 (3/32) .750 1.250 (13x) 1/8 2-1/2 13693 31.50 13693-C3 35.70 10093 42.20
.093 (3/32) .500 1.400 (15x) 1/8 3 948293 39.40 948293-C3 43.60    
.095 .750 1.250 (13x) 1/8 2-1/2 13695 31.20 13695-C3 35.40 10095 41.90
.100 .750 1.250 (12x) 1/8 2-1/2 13700 31.20 13700-C3 35.40 10100 41.90
D1 +.000"/-.002" L2 +.020"/-.000" L3 +.020"/-.000" D2 L1 3 FL PRICE 3 FL PRICE 3 FL PRICE
.125 (1/8) .625 1.250 (10x) 1/8 2-1/2 956408 31.20 956408-C3 35.40    
.125 (1/8) 1.000 1.500 (12x) 1/8 2-1/2 13708 31.50 13708-C3 35.70 10108 42.20
.125 (1/8) .625 1.875 (15x) 1/8 3 948308 41.70 948308-C3 45.90    
.187 (3/16) 1.125 1.625 (8x) 3/16 3 13712 36.90 13712-C3 41.10 10112 51.60
.250 (1/4) 1.500 2.000 (8x) 1/4 4 13716 41.10 13716-C3 45.30 10116 57.80

Speeds & Feeds

Below you will find downloadable and printer-friendly Speeds & Feeds for this product line. All posted Speed & Feed parameters are suggested starting values that may be increased given optimal setup conditions. If you can't find the information you're looking for, Harvey Tool has a team of technical experts available to assist you. Please contact us at 800-645-5609 or tech@harveytool.com.

Square - Long Reach, Long Flute

Miniature End Mills - Square Long Reach Long Flute, 10x Reach

Miniature End Mills - Square Long Reach Long Flute, 15x Reach

 

Harvey Tool offers a wide assortment of specialty Miniature Long Reach, Long Flute Square End Mills in a variety of sizes and lenghts of cut. You may find our Advanced Search feature helpful to locate the best stock tool for your application. The Advanced Search allows you to select your critical dimensions to narrow your search. However, if you are looking for a tool that we don’t offer as a standard, we can provide you with a special custom tool. Simply fill out the Request for Quote (RFQ) Template that best represents the tool you need, and submit via email or fax. One of our technical experts will get back to you. If you need help designing your special tool, you can contact our Quotations Department.

Phone - 978-948-8555 ext. 6004 - Ask for our Quotations Department.
RFQ Fax - 978-948-8560
Email -
tech@harveytool.com


SQUARE PROFILE: 

Special RFQ - Square End Mills (Miniature)

Special RFQ - Square End Mills

Special RFQ - Square End Mills (Miniature, Long Reach)

Special RFQ - Square End Mills (Long Reach)


BALL PROFILE:

Special RFQ - Ball End Mills (Miniature)

Special RFQ - Ball End Mills

Special RFQ - Ball End Mills (Miniature, Long Reach)

Special RFQ - Ball End Mills (Long Reach)


CORNER RADIUS PROFILE:

Special RFQ - Corner Radius End Mills (Miniature)

Special RFQ - Corner Radius End Mills

Special RFQ - Corner Radius End Mills (Miniature, Long Reach)

Special RFQ - Corner Radius End Mills (Long Reach)

Need To Place An Order? Find A Local Distributor

Machinists' Feedback

2 reviews for this product. Average rating: Rating StarRating StarRating StarRating StarRating Star

Create your own review

Rating StarRating StarRating StarRating StarRating Star   life savers

By bob s. edgewood, NY, United States, September 10, 2013

Harvey tools 1/16 end mill with .750 reach was the only off the shelf cutter I could use to clear dip braze from .070gap between wall and boss .THANKS HARVEY!!!

1 of 1 people found the following review helpful:
Was this review helpful to you?  Yes | No

Rating StarRating StarRating StarRating StarRating Star   largest selection

By JOHN R. WHEELING, IL, United States, August 28, 2012

harvey tool has the largest selection of miniature longer than std. carbide end mills, and they're always stocked.

3 of 3 people found the following review helpful:
Was this review helpful to you?  Yes | No

E-mail A Friend

Privacy Policy. All rights reserved. All Content Herein © 2017 Harvey Tool